KEPID AMSTECH CO. LTD. EMU11A Manual Do Utilizador

2. Installing and Configuring Hardware 

 

-13- 

 

2.2 Installing EMU 

 

 

During EMU installation, be sure to turn off the power. 

 

Do not apply physical damage to the product. If the clamp is 

separated or its insulation tube is stripped, it may cause injury or 

death. 

 

Only qualified persons must install EMU. 

 

Be sure to install EMU in the distribution panel with an additional 

lock. Only the qualified person must access the distribution panel.

 

Be sure to follow the instruction in this manual during installation. 

Keep the specified specifications and regulations. 

 

2.2.1 Installing the EMU body 

To keep effective wireless network communication, do not install EMU in front of 

interference generating materials or metal surfaces. If the embedded antenna is close 

to the material, it can decrease the efficiency of the embedded antenna. 

To mount the EMU on the wall, perform the following steps: 

1.  Prepare two screws. 

2.  Insert screws in the holes shown in Figure 1.2 and fasten them with a 

screwdriver. 

 

To mount the EMU onto a DIN rail, perform the 

following steps: 

1.  Insert the EMU onto the DIN rail and move it to 

a desired position.   

2.  Pull up the fix clip to fix the EMU.