EnGenius Technologies ENH220EXT Benutzerhandbuch

17

To attach the ENH220EXT to a pole using the 
provided pole mounting kit:

1.  Place the lock and flat washers on the four hex cap screws

and drive the screws to attach the bracket to the back of 
the Access Point.

2. Drive the four round head screws to attach the Pole 

Mount Bracket to the bracket.

  
 

3.  Thread the open end of the Pole Strap through the two 

tabs on the Pole Mount Bracket .

4.  Lock and tighten the Pole Strap to secure the Pole Mount 

Bracket to the pole.

Note:  See diagram below for vertical and horizonal 
placements.