ICOM 325300 Benutzerhandbuch
37
6
MEMORY/CALL CHANNELS
N Copying memory/call contents
This function transfers a memory channel’s contents to VFO
(or another memory/call channel). This is useful when search-
ing for signals around a memory channel frequency and for
recalling the frequency offset, subaudible tone frequency etc.
(or another memory/call channel). This is useful when search-
ing for signals around a memory channel frequency and for
recalling the frequency offset, subaudible tone frequency etc.
D Memory/call¶VFO
qSelect the memory (call) channel to be copied.
± Push [V/M/C] repeatedly to select the memory mode
or the call channel mode, then rotate [DIAL] to select a
desired channel.
desired channel.
w Push and hold [S.MW](V/M/C) for 1 sec. to enter the select
memory write mode.
• 1 short and 1 long beep sound.
• “
• “
” icon and memory channel number blink.
eRotate [DIAL] to select “VFO.”
r Push and hold [S.MW](V/M/C) for 1 sec. to write the se-
lected channel contents to the VFO mode.
• Returns to the VFO mode automatically.
Pushing and holding [S.MW](V/M/C) for 2 seconds at step
w, will also copy the memory contents to VFO. In this
case, steps
w, will also copy the memory contents to VFO. In this
case, steps
e and r are not necessary.
D Memory/call¶memory/call
qSelect the memory (call) channel to be copied.
± Push [V/M/C] repeatedly to select the memory mode
or the call channel mode, then rotate [DIAL] to select a
desired channel.
desired channel.
w Push and hold [S.MW](V/M/C) for 1 sec. to enter the select
memory write mode.
• 1 short and 1 long beep sound.
• “
• “
” icon and memory channel number blink.
• Do not hold [S.MW](V/M/C) for more than 2 seconds otherwise
the memory contents will be copied to the VFO mode.
eRotate [DIAL] to select the target memory (call) channel.
rPush and hold [S.MW](V/M/C) for 1 sec. again to copy.
[DIAL]
Memory mode
Enter
the select memory write mode.
the select memory write mode.
to select “VFO.”
Rotate
Push and hold
for 1 sec.
“VFO” is selected.
Return to the VFO mode.
Push and hold
for 1 sec.
[EXAMPLE]: Copying memory channel 11 to the VFO mode.