ICOM 325300 ユーザーズマニュアル

37

6

MEMORY/CALL CHANNELS

N Copying memory/call contents

This function transfers a memory channel’s contents to VFO 
(or another memory/call channel). This is useful when search-
ing for signals around a memory channel frequency and for 
recalling the frequency offset, subaudible tone frequency etc.

D Memory/call¶VFO

qSelect the memory (call) channel to be copied.

± Push [V/M/C] repeatedly to select the memory mode 

or the call channel mode, then rotate [DIAL] to select a 
desired channel.

w  Push and hold [S.MW](V/M/C) for 1 sec. to enter the select 

memory write mode.

• 1 short and 1 long beep sound.
• “

” icon and memory channel number blink.

eRotate [DIAL] to select “VFO.”

r  Push and hold [S.MW](V/M/C) for 1 sec. to write the se-

lected channel contents to the VFO mode.

• Returns to the VFO mode automatically.

Pushing and holding [S.MW](V/M/C) for 2 seconds at step 
w, will also copy the memory contents to VFO. In this 
case, steps 

e and r are not necessary.

D Memory/call¶memory/call

qSelect the memory (call) channel to be copied.

± Push [V/M/C] repeatedly to select the memory mode 

or the call channel mode, then rotate [DIAL] to select a 
desired channel.

w  Push and hold [S.MW](V/M/C) for 1 sec. to enter the select 

memory write mode.

• 1 short and 1 long beep sound.
• “

” icon and memory channel number blink.

• Do not hold [S.MW](V/M/C) for more than 2 seconds otherwise 

the memory contents will be copied to the VFO mode.

eRotate [DIAL] to select the target memory (call) channel.

rPush and hold [S.MW](V/M/C) for 1 sec. again to copy.

[DIAL]

Memory mode

Enter
the select memory write mode.

to select “VFO.”

Rotate

Push and hold

for 1 sec.

“VFO” is selected.

Return to the VFO mode.

Push and hold

for 1 sec.

[EXAMPLE]: Copying memory channel 11 to the VFO mode.