Qolsys Inc. QS5210P01 Benutzerhandbuch
IQCO (QS-5210-PO1)
Wireless Carbon Monoxide Alarm
Installation Guide
Attention: This manual should be read prior to use and retained for further
information.
information.
GENERAL INFORMATION
The IQCO (QS-5210-PO1) Wireless Carbon Monoxide Alarm is a 3V
battery powered wireless detector intended for use with a compatible
wireless alarm system. The detector consists of an electrochemical carbon
monoxide sensor assembly coupled to a wireless transmitter. The IQCO
(QS-5210-PO1) Wireless Carbon Monoxide Alarm communicates with the
control panel and can send alarm, tamper and battery condition messages
to the system’s receiver. Refer to the wireless system’s instruction for the
maximum number of transmitters that can be supported.
IMPORTANT: This detector must be tested and maintained regularly
following NFPA 720 requirements.
This device is designed to protect individuals from the acute effects of
carbon monoxide exposure. It will not fully safeguard individuals with
specifi c medical conditions. If in doubt consult a medical practitioner.
The IQCO (QS-5210-PO1) Wireless Carbon Monoxide Alarm is a 3V
battery powered wireless detector intended for use with a compatible
wireless alarm system. The detector consists of an electrochemical carbon
monoxide sensor assembly coupled to a wireless transmitter. The IQCO
(QS-5210-PO1) Wireless Carbon Monoxide Alarm communicates with the
control panel and can send alarm, tamper and battery condition messages
to the system’s receiver. Refer to the wireless system’s instruction for the
maximum number of transmitters that can be supported.
IMPORTANT: This detector must be tested and maintained regularly
following NFPA 720 requirements.
This device is designed to protect individuals from the acute effects of
carbon monoxide exposure. It will not fully safeguard individuals with
specifi c medical conditions. If in doubt consult a medical practitioner.
WARNING
This product is intended for use in ordinary
indoor
residential areas. It is
not designed to measure compliance with Occupational Safety & Health
Administration (OSHA) commercial and industrial standards.
Contents of box:
Administration (OSHA) commercial and industrial standards.
Contents of box:
• IQCO (QS-5210-PO1) Wireless Carbon Monoxide Alarm with base
• Installation guide
• Pack of screws and anchors
• Labels as appropriate
• 1 CR123A Panasonic battery
• Installation guide
• Pack of screws and anchors
• Labels as appropriate
• 1 CR123A Panasonic battery
!