Seal One AG 8300 Benutzerhandbuch

Thank you for choosing a product of Seal 

One AG. 

To use your Seal One

 8300pro you need 

to download the proper software for your 
operating system.  Please open a browser in 

your Laptop/Tablet/Smarthone and go to:

www.seal-one.com/8300pro

and follow the step by step introduction.

Seal One

 8300pro combines the maximum 

security for online and mobile transactions 
with a very easy operation. The device is 

designed for transactions based on digital 

signatures (e.g. as part of an online or mobile 
banking). 

Where can I use Seal One

 devices? 

Seal One devices are accepted by all partners 
of Seal One AG. They indicate the possiblibily 
to use by the Seal One acceptance Logo: 

                                You can check a list of 
                                the partners at:

 www.seal-one.com/partner

 

The following accessories are included with 
the Seal One

 8300pro:

- USB charging adapter

- Protection bag

- Protection case
- This user manual

To accticate the device at an acceptance 
partner, please refer to the webpage of 
the partner and follow the step by step 
instruction. 
Registered Seal One acceptance partner 
indicate the acceptance by the Seal One 
acceptance logo shown at the left.

 8300pro 

The operation of Seal One

 8300pro is simple, 

convenient and secure and takes place in 
three steps:

1. Connect

Turn on the device and connect with the 
software based on your operating system. 

2. Validate

Validate the transaction data on the display 
of the device. 

3. Confi rm

Confi rm by the push of the signing button.

CAUTION: Failure to observe the 

following safety guidelines may under certain 
circumstances result in fi re, electrical shock, 
other injury or damage to the Seal One 

unit or other components. Please ensure 
that children do not have any access to the 
hardware and packaging materials. Never let 
children play with the device. The device and 
the acessories can be swallowed by children.  
Never throw the device in a fi re!

The device is designed and manufactured 
with great care and should be treated with 

care. The following recommendations and 
operating instructions should help you to 

ensure a long-lasting operation and a long life 

expectancy:
- avoid dropping the device and never open it

- protect against direct sunlight, high 

  teperatures and severe temperature 

  changes, this could damage movable and 

  electronic components and the functionality 
  is no longer guaranteed.

- the use of the device once it has been 

  damaged is prohibited. 
- the housing of the device can break through 

  substantial impact. When not using the 

  device, it is recommended to put it to the 

  protection bag or protection cover,  
- protect the device from humidity and 
  liquids. and do not put paint on it.  

- use device the at a clean and dry place
- protect the device from dust and vapors 
- do not touch the contacts with sharp or 
  metal objects. 
- to clean, use slightly damp, lint-free cloth 
  and do not use harsh cleaners or solvents.

You must dispose of Seal One

 8300pro 

properly according to local laws and regula-

tions. Because Seal One

 8300pro contains 

electronic components and a battery, Seal 

One

 8300pro must be disposed of separately 

from household waste. When Seal One

 

8300pro reaches its end of life, contact local 
authorities to learn about disposal and recy-

cling options, or simply return it to Seal One. 
The battery will be removed and recycled in 
an environmentally friendly manner. 

           This symbol means that according            

           to local laws and regulations your 

           product and its battery should be 

           recycled separately from household 

waste. When this product reaches its end of 
life, take it to a collection point designated 

by local authorities for the recycling of 
electronic equipment. The improper disposal 

of waste electronic equipment from the con-

sumer may be subject to fi nes. The separate 

collection and recycling of your product and 

its battery at the time of disposal will help 
conserve natural resources and ensure that it 

is recycled in a manner that protects human 

health and the environment.

Hereby Seal One AG declares that this equip-
ment is in compliance with EC the essential 
requirements and other relevant provisions of 
Directive 2004/108/EC. 

                          The CE mark guarntees the 
                          fulfi llment of the directives 
                          of the European Union.

This device complies with part 15 of the FCC 
rules. Operation is subject to the following 

two conditions: (1) This device may not cause 
harmful interference, and (2) this device must 

accept any interference received, including 
interference that may cause undesired 
operation.
Note: This equipment has been tested and 

found to comply with the limits for a Class 

B digital device, pursuant to part 15 of the 
FCC Rules. These limits are designed to 

provide reasonable protection against harmful 

interference in a residential installation. This 
equipment generates, uses, and can radiate 

radio frequency energy and, if not installed 

and used in accordance with the instructions, 

may cause harmful interference to radio com-

munications. However, there is no guarantee 
that interference will not occur in a particular 

installation. If this equipment does cause 

harmful interference to radio or television 
reception, which can be determined by 

turning the equipment off and on, the user is 

encouraged to try to correct the interference 

by one or more of the following measures:

- Reorient or relocate the receiving antenna.
- Increase the separation between the equip-

ment and receiver.
- Connect the equipment to an outlet on 
a circuit different from that to which the 
receiver is connected.
Consult the dealer or an experienced radio/
TV technician for help.

Important: Changes or modifi cations to this 
product not authorized by Seal One could 
void the electromagnetic compatibility (EMC)

button for signing

display

connector for charging

  ON / OFF