X-Z LAB INC. 113 Benutzerhandbuch
3. Quick Installation
1. Connect one end of the network cable to the RJ45 interface in the back of the IoT-Cloud;
2. Connect another end of the network cable to the PC port of the monitoring server, or the
router which is well connected with the server;
3. Fix the rod antenna in the SMA port in the back of the IoT-Cloud;
4. During installation, keep the device away from metal material which may effects the signal
quality;
5. Power on the IoT-Cloud through the adapter with the voltage range from 100V to 220V AC,
the power light will turn red when the device starts to work.
4.Electromagnetic Compatibility
This product complies with relevant international and national laws and standards on EMC
(electromagnetic compatibility) for this type of product when used as intended. Such laws and
standards define both the permissible electromagnetic emission levels from equipment and its
required immunity to electromagnetic interference from external sources.
Other electronic products exceeding the limits defined in such EMC standards could, under
unusual circumstances, affect the operation of the product.
• Information Technology Equipment (ITE) need special precautions regarding EMC, and need to
be installed and put into service according to EMC information provided in the accompanying
documents.
• Please use the shielding RJ 45 port which is meant to connect with PC, the use of accessories
and cables other than those specified may result in increased emission or decreased immunity
levels.
• The product should not be used adjacent to or stacked with other products and that if adjacent
or stacked use is necessary, it should be observed to verify normal operation.
This equipment is intended for use in a hospital environment. Operation in other than hospital
environments may compromise electromagnetic compatibility.
The IoT-Cloud complies with part 15 of the FCC Rules. Operation is subject to the following
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
(electromagnetic compatibility) for this type of product when used as intended. Such laws and
standards define both the permissible electromagnetic emission levels from equipment and its
required immunity to electromagnetic interference from external sources.
Other electronic products exceeding the limits defined in such EMC standards could, under
unusual circumstances, affect the operation of the product.
• Information Technology Equipment (ITE) need special precautions regarding EMC, and need to
be installed and put into service according to EMC information provided in the accompanying
documents.
• Please use the shielding RJ 45 port which is meant to connect with PC, the use of accessories
and cables other than those specified may result in increased emission or decreased immunity
levels.
• The product should not be used adjacent to or stacked with other products and that if adjacent
or stacked use is necessary, it should be observed to verify normal operation.
This equipment is intended for use in a hospital environment. Operation in other than hospital
environments may compromise electromagnetic compatibility.
The IoT-Cloud complies with part 15 of the FCC Rules. Operation is subject to the following
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modifications to the equipment not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.