X-Z LAB INC. 113 Benutzerhandbuch
force of law) concerning electrical safety for this type of product. Electrically isolate this product
from the mains electrical supply before cleaning, disinfecting or sterilizing it.
Mechanical safety
WARNING Do not remove covers from this product. Removing covers could lead to serious or
fatal personal injury. Covers should only be removed by qualified and authorized service
personnel. In this context, qualified means those legally permitted to work on this type of
medical electrical product in the jurisdiction(s) in which the product is being used, and
authorized means those authorized by the user of the product.
Explosion safety
WARNING Do not use this product in the presence of explosive gases or vapors.
WARNING Do not use flammable or potentially explosive disinfecting sprays.
WARNING Use of this product in an environment for which it was not designed can lead to fire or
explosion.
Fire safety
Use of electrical product in an environment for which it was not designed can lead to fire or
explosion. Fire regulations for the type of medical area being used should be fully applied,
observed and enforced. Fire extinguishers should be available for both electrical and
non-electrical fires.
WARNING Only use extinguishers on electrical or chemical fires, which are specifically labeled for
those purposes. Using water or other liquids on an electrical fire can lead to fatal or other serious
personal injury. If it is safe to do so, attempt to isolate the product from electrical and other
supplies before attempting to fight a fire. This will reduce the risk of electric shocks.
Electrostatic discharge (ESD)
CAUTION Always wait at least ten seconds after the product is switched OFF before switching the
product back to ON.
CAUTION Always use proper static procedures, protection, and product prior to opening and
during handling of this product. This product contains components that are electrostatic
sensitive. Failure to use ESD procedures may cause damage to these components. Such damage
to components is not covered by RAYCAN warranties.
ESD can amount to a significant voltage, which may cause damage to PCBs or other system
components.
ESD damage is cumulative and may not be apparent at first, as indicated by a hard failure, but
can cause degraded performance. Therefore, always use proper ESD handling procedures. ESD
can result from low humidity conditions, use of electrical equipment on carpeting, linens, and
clothing.
from the mains electrical supply before cleaning, disinfecting or sterilizing it.
Mechanical safety
WARNING Do not remove covers from this product. Removing covers could lead to serious or
fatal personal injury. Covers should only be removed by qualified and authorized service
personnel. In this context, qualified means those legally permitted to work on this type of
medical electrical product in the jurisdiction(s) in which the product is being used, and
authorized means those authorized by the user of the product.
Explosion safety
WARNING Do not use this product in the presence of explosive gases or vapors.
WARNING Do not use flammable or potentially explosive disinfecting sprays.
WARNING Use of this product in an environment for which it was not designed can lead to fire or
explosion.
Fire safety
Use of electrical product in an environment for which it was not designed can lead to fire or
explosion. Fire regulations for the type of medical area being used should be fully applied,
observed and enforced. Fire extinguishers should be available for both electrical and
non-electrical fires.
WARNING Only use extinguishers on electrical or chemical fires, which are specifically labeled for
those purposes. Using water or other liquids on an electrical fire can lead to fatal or other serious
personal injury. If it is safe to do so, attempt to isolate the product from electrical and other
supplies before attempting to fight a fire. This will reduce the risk of electric shocks.
Electrostatic discharge (ESD)
CAUTION Always wait at least ten seconds after the product is switched OFF before switching the
product back to ON.
CAUTION Always use proper static procedures, protection, and product prior to opening and
during handling of this product. This product contains components that are electrostatic
sensitive. Failure to use ESD procedures may cause damage to these components. Such damage
to components is not covered by RAYCAN warranties.
ESD can amount to a significant voltage, which may cause damage to PCBs or other system
components.
ESD damage is cumulative and may not be apparent at first, as indicated by a hard failure, but
can cause degraded performance. Therefore, always use proper ESD handling procedures. ESD
can result from low humidity conditions, use of electrical equipment on carpeting, linens, and
clothing.
6.Trouble shooting
Problems
Solutions
Unable to connect correctly
Restart and check the connection.
* If the problem listed
above can’t be solved, please
above can’t be solved, please