Tramigo Ltd T-1304 Benutzerhandbuch

Seite von 78
 
 
 
 
  67 
 
6.2.45  
Zone 
Command:  
 
Zone,
distance/on/off/userLocations,placeName/in/out/both/off 
Alias:    
 
Parameters:  
on/off
 – optional. Turn zone reporting on or off 
distance – 
optional. Distance is in the units used by the system. Default is 
1. Minimum is 0.1 maximum is 999 
userLocations
 – optional. Sends a zone report when a user location has 
been entered/exited 
placeName
 – optional. Name of the location. Default is the current location 
of the vehicle 
in/out/both/off 
– optional. Used with parameter 
userLocations
 
 
 
Description:
  
Turns Zone reporting on and off. Notifies user when the vehicle is entering 
or leaving an area. The area is defined by a circle with a radius defined by 
the distance from the place name. 
Related Cmds: 
AddPlace 
Security:  
 
Friend  
Message Format:  
Command Response 
 
Errors: 
1.  Parameter Error 
2.  Lookup Error 
Notes:  
1.  Zone crossing is reported whenever the unit crosses a circle with radius of 
distance
 from 
the 
placename. 
2.  Zone reports will be only be issued when the unit has a GPS fix and the unit is in a Moving 
or Stopped state. If the unit crosses the zone without a fix, then the report will be delayed. 
3.  Once a crossing is detected there is a 10 minute delay between reports to avoid excessive 
reporting. 
4.  Adding a new Zone will replace the current active Zone. 
5.  The user can enter a partial string for the placeName, and if a unique name is not found 
then the system will select the closest placeName. Lookup is only done on the first name 
field of the location. User locations are also searched. 
6.  Zone reporting works best in fully installed units that have ignition sensing connected. 
7.  User locations are places added with command ADDPLACE. They can be set as zones with 
parameters in/out/both/off 
a.  In: sends a report when the user location has been entered 
b.  Out: sends a report when the user location has been exited 
c.  Both: sends a report when user location has been entered/exited 
d.  Off: turns the user added locations zone reporting off 
 
Examples:  
 
ZONE 
Tramigo: Zone, Vehicle will report when 1 km from current Location, 1.1 km W of 
Glorietta Mall, 09:25 Jan 14  
 
 
ZONE,5,home 
Tramigo: Zone, Vehicle will report when 5 km from, Home, 09:25 Jan 14