Nokia Solutions and Networks Oy FZCWM2A1 Benutzerhandbuch
3 Installing
Flexi Zone Multiband Indoor Pico BTS Quick Guide
Checklist
Installing Flexi Zone Multiband Indoor Pico BTS onto walls
1.
2.
3.
3.
Mark four screw holes on the designated wall. Check that the
mounting bracket is level.
Drill holes in the marked places.
Secure the bracket onto the wall with four screws. Tighten
Secure the bracket onto the wall with four screws. Tighten
screws according to the wall mount hardware manufacturer's
instructions. Ensure that the bracket is secure and immovable.
4. Attach the module (with required cables connected) to the
bracket.
5. Slide the module down onto the bracket so that it hangs safely.
The unit will click into place when fully secured on the bracket.
instructions. Ensure that the bracket is secure and immovable.
4. Attach the module (with required cables connected) to the
bracket.
5. Slide the module down onto the bracket so that it hangs safely.
The unit will click into place when fully secured on the bracket.
The mounting screw and anchor hardware are not
included. Be sure to select the appropriate mounting screw and
anchor hardware specific to your installation surface.
anchor hardware specific to your installation surface.
NOTICE:
NOTICE:
-6-
1
2
4
3
5
x
x
x
x
Unit is attached to the mounting bracket and cannot slide off the mounting.