Nokia Solutions and Networks Oy FZCWM2A1 Benutzerhandbuch
4 Installing
Flexi Zone Multiband Indoor Pico BTS Quick Guide
Checklist
Installing Flexi Zone Multiband Indoor Pico BTS onto a ceiling grid
1.
2.
3.
2.
3.
Expand the ceiling clip to the maximum width.
Lift the ceiling clip to the ceiling.
Compress the clip to one of the three possible ceiling widths: A = 38 mm (1.5 in.), B = 24 mm (0.94 in.), C = 15 mm (0.59 in.)
Compress the clip to one of the three possible ceiling widths: A = 38 mm (1.5 in.), B = 24 mm (0.94 in.), C = 15 mm (0.59 in.)
and tighten it with four M4 screws to the ceiling (1.7 Nm (15.0 in-lbs) to 2.3 Nm (20.0 in-lbs)).
4. Lift the mounting bracket to the ceiling clip and fix it with four M4 screws (1.7 Nm (15.0 in-lbs) to 2.3 Nm (20.0 in-lbs)) matching the
corresponding screw holes (A, B or C) from step 3.
5. Lift the Pico module (with required cables connected) and attach it to the bracket until the module clicks into place.
6. Secure the module with a cable lock or pad-lock (Customer supplied).
4. Lift the mounting bracket to the ceiling clip and fix it with four M4 screws (1.7 Nm (15.0 in-lbs) to 2.3 Nm (20.0 in-lbs)) matching the
corresponding screw holes (A, B or C) from step 3.
5. Lift the Pico module (with required cables connected) and attach it to the bracket until the module clicks into place.
6. Secure the module with a cable lock or pad-lock (Customer supplied).
-7-
1
3
2
NOTICE: Make sure that the ceiling grid location is well supported.
NOTICE: Make sure that the ceiling grid location is well supported.
4
5
6
cable lock or
pad-lock slots
!
1.7 Nm
to
2.3 Nm
!
!
1.7 Nm
to
2.3 Nm
!
!
!
1.7 Nm
to
2.3 Nm
Lock is in place.