Bernecker&Rainer Industrie-Elektronik Ges.m.b.H 5E903029 Benutzerhandbuch
Commissioning
Data sheet V 1.00 5E9030.29
13
3 Commissioning
3.1 Connection
The reader can be used on any conventional type A USB interface that fulfills the specifications listed in the
3.2 Driver installation
The driver for the USB communication device class (CDC) must be installed before you can use the transponder.
After the driver installation, the reader is identified as a serial COMx device.
After the driver installation, the reader is identified as a serial COMx device.
Information:
This driver can be downloaded from the B&R website (
3.3 Port settings
The following port settings are necessary for communication:
Bits per second: 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
Bits per second: 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
3.4 Terminal program
An appropriate terminal program (please note
) can be used to communicate with the reader. In
Windows, the freeware tools RealTerm or TeraTerm can be used, for example.
Information:
Depending on the configuration of the terminal program, it may be necessary to enable input echoing
("echo_on" command) to see input on the screen.