Vubiq Networks Inc. V10G-L Benutzerhandbuch
14
Vubiq HaulPass V10g User Manual
© 2018 Vubiq Networks, Inc. All Rights Reserved
3.3 Hardware Installation
Step 1. Mount the L-Com Lightning Arrestor to the pole below the mounting point and within 4 feet (1.2 meters) of
the V10g Terminal (see Figures 2 and 3).
the V10g Terminal (see Figures 2 and 3).
Figure 2. L-Com Lightning Arrestor (Front View)
Figure 3. L-Com Lightning Arrestor (Rear View)
Step 2. Connect the Ethernet line cable to the LINE (left) side of the L-Com Lightning Arrestor. It is assumed that
the other end of the line cable is plugged in to a POE++ supply.
the other end of the line cable is plugged in to a POE++ supply.
Step 3. Mount the Pole Mount Bracket Assembly to the pole as shown in Figure 4. Alternatively, discard the back
plate for wall mounting options.
plate for wall mounting options.