Vubiq Networks Inc. V10G-L Benutzerhandbuch
58
Vubiq HaulPass V10g User Manual
© 2018 Vubiq Networks, Inc. All Rights Reserved
10.0
RF Commands
There are a series of rf commands that can be executed at the CLI or through the Web GUI. The rf commands
control how the rf or radio portion of the Vubiq HaulPass V10g work. Many of commands display data that is also
available through SNMP. Where the data is available through SNMP the MIB and OID will be provided.
control how the rf or radio portion of the Vubiq HaulPass V10g work. Many of commands display data that is also
available through SNMP. Where the data is available through SNMP the MIB and OID will be provided.
10.1 RF Board (Board Setting/Status)
The rf board commands allow the user to view the current values of several parameters but don’t allow for the
values to be changed.
values to be changed.
current-5v (Board 5V current status)
The value reported by current-5v is the amount of current that the board is currently using in mA.
The CLI command:
# rf board current-5v
2388
#
2388
#
The Web GUI view:
MIB: vubiqRfBoardCurrent5V
OID: .1.3.6.1.4.1.46330.2.2.1.18.0 (Integer)
firmware version (Board firmware version setting)
The value reported by the firmware command is the revision of the current RF firmware.
The CLI command:
# rf board firmware version
2.03.05
#
2.03.05
#