Appareo Systems LLC 1505005 Benutzerhandbuch

Seite von 42
600840-000031 Stratus ESG Installation Instructions 
Rev. 1.1 
Last Revised: January 6, 2016 
 
Page 28 of 42 
4.18. 
SBAS service provider 
Select the SBAS service provider: 
  WAAS (North America) 
  EGNOS (Europe) 
  MSAS (Japan) 
  GAGAN (India) 
  SDCM (Russia) 
  Automatic (automatically chooses service provider based on location) 
Choose Automatic if the pilot might change regions during the operation of Stratus ESG. 
4.19. 
Diagnostic screens 
The following screens are used for diagnostic purposes only and usually do not require any 
input from the installer. 
 
GPS week number rollovers 
The GPS week number rollovers screen tracks the number of GPS rollovers, which occur every 
1024 weeks (19.7 years). The screen should display the following values, depending on the 
year: 
Dates 
Rollover number 
August 22, 1999 
– April 6, 2019 
April 7, 2019 
– November 20, 2038 
 
If the value shown on the screen is incorrect, edit the configuration and select the correct 
rollover number. 
 
Altitude input diagnostic 
The altitude input diagnostic screen shows the current gray code altitude input from the parallel 
altitude encoder and also displays the current altitude. You can use this screen to verify that a 
parallel altitude encoder is properly connected. If a serial altitude encoder is connected, or there 
is no altitude encoder connected, 
the altitude input will display all 0’s. 
 
External inputs diagnostic 
The external digital inputs diagnostic screen shows if the IDENT and standby modes are active 
or inactive. It also shows if the squat switch is indicating that the aircraft is ground, airborne, or 
unknown. You can use this screen to verify that the squat switch settings are properly 
configured.