Appareo Systems LLC 1505005 Benutzerhandbuch
600840-000031 Stratus ESG Installation Instructions
Rev. 1.1
Last Revised: January 6, 2016
Page 29 of 42
Analog inputs diagnostic
The analog inputs diagnostic screen shows the current reading of the lighting bus and ambient
light sensor to the nearest percentage, and the current reading of the internal temperature
sensor to the nearest degree Celsius.
light sensor to the nearest percentage, and the current reading of the internal temperature
sensor to the nearest degree Celsius.
GPS receive diagnostic
The GPS receive diagnostic screen shows the current reading of the GPS latitude, GPS
longitude, and Navigation Integrity Category (NIC).
longitude, and Navigation Integrity Category (NIC).
GPS CN0 diagnostic
The GPS CN0 diagnostic screen shows the current value of GPS CN0 for all 12 channels.
Software versions diagnostic
The software versions diagnostic screen shows the DSC part number, version number, and
flash checksum.
flash checksum.
Complex hardware versions diagnostic
The complex hardware versions diagnostic screen shows the FPGA part number, version
number, and flash checksum.
number, and flash checksum.
BIT diagnostic
The BIT diagnostic screen displays any Built In Test failure codes. If the screen displays all
zeros, no BIT failure has been detected. Otherwise, a
zeros, no BIT failure has been detected. Otherwise, a
“1” will display. Each number corresponds
with a specific failure, depending on its position in the string of numbers on the screen
—failure
position 1 being the leftmost space, and failure position 19 being the rightmost space.
Reference the table below to determine which BIT has failed. Once all BIT failures have been
resolved, press ENT to clear all codes.
Reference the table below to determine which BIT has failed. Once all BIT failures have been
resolved, press ENT to clear all codes.
Failure Position
BIT Failure
Corrective Action
1
Transmitter
Contact Appareo
2
Display
Contact Appareo
3
GPS Failure
Contact Appareo
4
Altitude Source
Use the altitude diagnostic screen to
troubleshoot the altitude encoder
connection
troubleshoot the altitude encoder
connection
5
Internal Temperature
Let the transponder cool down. If the
BIT failure persists, contact Appareo.
BIT failure persists, contact Appareo.
6
Single Event Upset
Contact Appareo
7
Stuck Key
Try to unstick the stuck key
8
Stuck External IDENT
Use the external inputs diagnostic
screen to check correctness of external
IDENT polarity
screen to check correctness of external
IDENT polarity