Appareo Systems LLC 1505005 Benutzerhandbuch
600840-000031 Stratus ESG Installation Instructions
Rev. 1.1
Last Revised: January 6, 2016
Page 36 of 42
Table 26: Event indicators
6.3.
FUNC key
Press the FUNC key or the arrow keys, to switch from the default screen to the Pressure
Altitude screen, GPS screen, Flight ID screen, and Brightness screen. These screens are
described below:
Altitude screen, GPS screen, Flight ID screen, and Brightness screen. These screens are
described below:
Pressure altitude screen: Displays the current pressure altitude. If no valid altitude is detected
or Stratus ESG is in On mode, the altitude field will be replaced by dashes.
or Stratus ESG is in On mode, the altitude field will be replaced by dashes.
Figure 4: Pressure altitude screen
GPS screen: D
isplays the aircraft’s GPS position in degrees latitude and longitude. If no GPS
signal is being received, the latitude and longitude fields will be replaced by dashes.
Figure 5: GPS screen
Flight ID screen: Displays the currently entered Flight ID.
Figure 6: Flight ID screen
Brightness screen: Allows for adjustment of screen brightness in-flight. Press ENT, then the
left or right arrow keys to adjust brightness. Press ENT again to confirm the new setting.
left or right arrow keys to adjust brightness. Press ENT again to confirm the new setting.
Figure 7: Brightness screen