Appareo Systems LLC 15355015 Benutzerhandbuch
600890-000047 Ag Tag Demo User
’s Guide
Revision 1.2
Date Last Revised: August 27, 2014
Page 12 of 18
2.6 Installing tire pressure sensors
Ag Tags can communicate the pounds per square inch (PSI) readings of tires for the Ag Tags
they are attached to. Please note that the Ag Tag must be installed on the machine and added
to the Ag Tag app before you can add a tire pressure sensor to it.
Once the sensor is installed, the tire pressure reading will display on the Ag Tag information
screen as shown in Figure 8 below.
they are attached to. Please note that the Ag Tag must be installed on the machine and added
to the Ag Tag app before you can add a tire pressure sensor to it.
Once the sensor is installed, the tire pressure reading will display on the Ag Tag information
screen as shown in Figure 8 below.
Figure 8: Viewing tire pressure information for a combine
1. In the Ag Tag Demo app, select the Ag Tag installed on the implement from the My
Equipment screen.
2. From the machine diagram on the app, tap Install next to the tire you will be installing
the tire pressure sensor.
3. Once the Connect a Tire Pressure Sensor screen appears, remove the valve stem cap
of the tire.
4. Twist the tire pressure sensor into the valve stem. Wait a few minutes until the app
states the tire pressure sensor has been successfully installed.
NOTE: The Ag Tag Demo app cannot detect tire pressure sensors installed on tires with
less than 8 PSI.
NOTE: The Ag Tag Demo app cannot detect tire pressure sensors installed on tires with
less than 8 PSI.