Shenzhen Baicheng Innovation Technology Co. Ltd BCPTA Benutzerhandbuch
PLUTO TRIGGER
BAICHENG INNOVATIONS
28
No parameter needs to set. Pluto will trigger your camera whenever there is some
change of infrared emissions. And the trigger signal will be last for 2-3 seconds.
You can change the “Burst” settings in the Settings Menu to take several photos
every time animal enters.
change of infrared emissions. And the trigger signal will be last for 2-3 seconds.
You can change the “Burst” settings in the Settings Menu to take several photos
every time animal enters.
PIR mode is not limited to take photo of animals; you can use it to take photo of
each passenger on the street automatically.
each passenger on the street automatically.
What’s more, you can use it as a non-contact shutter release button. Just wave
your hand in front of the dome of Pluto Trigger, and the camera takes a photo.
your hand in front of the dome of Pluto Trigger, and the camera takes a photo.
5.6.
D
ROPLET MODE
Droplet Mode is a mode to help you to take photos of water drop collision easily.
You will need a Valve Kit to use this mode. The instructions of how to make a Valve
Kit can be found on our website.
You will need a Valve Kit to use this mode. The instructions of how to make a Valve
Kit can be found on our website.
In Droplet Mode, you have to decide the size and delay of two consecutive
water drops and when to trigger the flashgun.
water drops and when to trigger the flashgun.
Usage
1.
Make sure Pluto Trigger is connected to your flashgun.
2. Make sure Valve Kit is connected to Aux port of Pluto Trigger; and supply
power to Valve Kit.
3. Make sure to connect your phone to the camera with the Pluto Dongle. Set
your camera to Manual mode; set shutter speed to 1 sec.
4. Select "Droplet" from app’s menu.
5. Set “Drop 1 Size” as you want.
6. Calibrate the “Flash Delay” to make Drop 1 bounce back from the surface of
water and to its max height. To use the auto calibration, click on the button to
the right of “Flash Delay” parameter and calibration dialog appears. Set the
“Time Step” and “Repeat Interval” parameters, then click the auto calibrate
button. Pluto trigger will start to release water drops and trigger flash with
incrementing delay. Each time a photo is taken, you have to check the
the right of “Flash Delay” parameter and calibration dialog appears. Set the
“Time Step” and “Repeat Interval” parameters, then click the auto calibrate
button. Pluto trigger will start to release water drops and trigger flash with
incrementing delay. Each time a photo is taken, you have to check the