Shenzhen Baicheng Innovation Technology Co. Ltd BCPTA Benutzerhandbuch
PLUTO TRIGGER
BAICHENG INNOVATIONS
29
screen of your camera to see if the delay is suitable. If yes, stop the auto
calibration immediately. The calibrated value will be saved to the “Flash
Delay” parameter.
calibration immediately. The calibrated value will be saved to the “Flash
Delay” parameter.
7. Set “Drop 2 Size” as you want.
8. Calibrate the “Drop 2 Delay” to make Drop 2 collide with Drop 1 at
appropriate height. The auto calibration procedure is similar to “Flash Delay”.
9. When all parameters are OK, you just press the “Start” button to take photos.
5.7.
A
UX MODE
Aux Mode is for DIYers. You can add other sensors that are not included in Pluto
Trigger, such as ultrasonic sensor, smoke sensor or temperature sensor.
Trigger, such as ultrasonic sensor, smoke sensor or temperature sensor.
You will need a 2.5mm audio cable to connect your DIY sensor to the Aux port of
Pluto Trigger. The tip of the cable connector is 3.3V and the base sleeve is Ground.
Pluto Trigger just samples the signal that is fed into the middle sleeve of the
connector. Please make sure the voltage of this input signal is in the range of
0-3.3V.
Pluto Trigger. The tip of the cable connector is 3.3V and the base sleeve is Ground.
Pluto Trigger just samples the signal that is fed into the middle sleeve of the
connector. Please make sure the voltage of this input signal is in the range of
0-3.3V.
5.8.
T
IMER MODE
Timer Mode is used to take photos or record video at certain time period of each
day. This is usually useful for Time-lapse of infrastructure projects or growing plants.
You need to supply power to camera and Pluto Trigger with AC adaptor for that
long period.
day. This is usually useful for Time-lapse of infrastructure projects or growing plants.
You need to supply power to camera and Pluto Trigger with AC adaptor for that
long period.
You can set the Start Time and End Time to take photos or record video. To take
photos, you have the option to set the interval to take photo.
photos, you have the option to set the interval to take photo.
5.9.
F
USION MODE
Fusion Mode is more advanced. It lets you combine the sensors available to make
it suitable for your special use case.
it suitable for your special use case.
You have the Fusion method of “AND” and “OR” to combine the sensors. You
have to set the parameters of each sensor in its own Mode.
have to set the parameters of each sensor in its own Mode.