TP-LINK TL-SG3424P Benutzerhandbuch
Multicast VLAN:
Enable or disable multicast VLAN function. When multicast
VLAN is enabled, all multicast data will forward in this VLAN if
this port belongs to the VLAN.
Multicast VLAN ID:
Enter the multicast VLAN ID.
Note:
1. When Unknown Multicast Filter is configured, the Unknown Multicast function in IGMP
Snooping is also configured at the same time.
3. Before creating a Multicast VLAN, you should enable the MLD snooping function in this VLAN
Configuration Procedure of Multicast VLAN:
Step Operation
Description
1
Create VLAN.
Required. On the
VLAN →802.1Q VLAN →VLAN Config
page, click the
Create button to create a VLAN. Enter the
VLAN ID and the description for the VLAN. Meanwhile,
specify its member ports.
2
Enable MLD Snooping
globally.
Required. On the
Multicast →MLD Snooping →Global
Config page, enable the MLD Snooping function globally.
3
Enable MLD Snooping in the
VLAN.
Required. On the
Multicast →MLD Snooping →VLAN
Config page, specify the VLAN ID as the VLAN created in
step 1.
4
Enable the Multicast VLAN. Required. On the
Multicast →MLD Snooping →Global
Config page, enable the Multicast VLAN function and
specify the
Multicast VLAN ID as the VLAN specified in
Step 1.
8.2.2 VLAN Config
On this page you can configure MLD Snooping function with each single VLAN. You need to
create VLAN if you want to enable MLD Snooping function in this VLAN.
Choose the menu
Choose the menu
Multicast→MLD Snooping→VLAN Config to load the following page.
129