Troy-Bilt TB330 XP Benutzerhandbuch
Operation
5
14
1
2
Engage the right, the left, or
both the right and left control
levers to propel the mower.
both the right and left control
levers to propel the mower.
Figure 5-1
Figure 5-2
Starting Engine
WARNING:
Be sure no one other than the operator
is standing near the lawn mower while starting
engine or operating mower. Never run engine
indoors or in enclosed, poorly ventilated areas.
Engine exhaust contains carbon monoxide, an
odorless and deadly gas. Keep hands, feet, hair and
loose clothing away from any moving parts on
engine and lawn mower.
engine or operating mower. Never run engine
indoors or in enclosed, poorly ventilated areas.
Engine exhaust contains carbon monoxide, an
odorless and deadly gas. Keep hands, feet, hair and
loose clothing away from any moving parts on
engine and lawn mower.
Refer to engine manual for help with the engine.
Standing behind the mower, squeeze the blade control
1.
against upper handle. See Fig. 5-1.
Holding the blade control and handle together firmly,
Holding the blade control and handle together firmly,
2.
grasp recoil starter handle and pull rope out with a rapid,
continuous, full arm stroke. See Fig. 5-1. Keeping a firm grip
on the starter handle, let the rope rewind slowly. Repeat
until engine cranks. Let the rope rewind each time slowly.
continuous, full arm stroke. See Fig. 5-1. Keeping a firm grip
on the starter handle, let the rope rewind slowly. Repeat
until engine cranks. Let the rope rewind each time slowly.
Stopping Engine
Release blade control to stop the engine and blade.
1.
WARNING:
Wait for the blade to stop completely
before performing any work on the mower or to
remove the grass catcher.
remove the grass catcher.
Using Your Lawn Mower
Be sure lawn is clear of stones, sticks, wire, or other objects
which could damage lawn mower or engine. Such objects could
be accidently thrown by the mower in any direction and cause
serious personal injury to the operator and others.
which could damage lawn mower or engine. Such objects could
be accidently thrown by the mower in any direction and cause
serious personal injury to the operator and others.
Once the engine is running and while continuing to hold
1.
the blade control down, squeeze either (or both) drive
controls against the upper handle to propel mower. See
Fig. 5-2.
To change speed, move speed control to the desired speed.
controls against the upper handle to propel mower. See
Fig. 5-2.
To change speed, move speed control to the desired speed.
2.
NOTE: When selecting a drive speed, use the first speed
until you are comfortable and familiar with the operation
of the mower.
IMPORTANT: If you are shifting speeds while the mower
is stationary it may be difficult to shift into first speed
under certain conditions. This is easily remedied by briefly
engaging the drive lever.
until you are comfortable and familiar with the operation
of the mower.
IMPORTANT: If you are shifting speeds while the mower
is stationary it may be difficult to shift into first speed
under certain conditions. This is easily remedied by briefly
engaging the drive lever.
WARNING:
The operation of any lawn mower can
result in foreign objects being thrown into the eyes,
which can damage your eyes severely. Always wear
safety glasses while operating the mower, or while
performing any adjustments or repairs on it.
which can damage your eyes severely. Always wear
safety glasses while operating the mower, or while
performing any adjustments or repairs on it.
NOTE: Your mower is equipped with an advanced internal
drive system for ease of use and smooth shifting. When
turning or pulling the unit rearward, you may notice higher
than normal resistance in the rear wheels under certain
conditions. This is perfectly normal and can be remedied
by allowing the unit to roll forward slightly without the
drive lever(s) engaged before pulling backwards.
drive system for ease of use and smooth shifting. When
turning or pulling the unit rearward, you may notice higher
than normal resistance in the rear wheels under certain
conditions. This is perfectly normal and can be remedied
by allowing the unit to roll forward slightly without the
drive lever(s) engaged before pulling backwards.