Troy-Bilt 13045 Benutzerhandbuch

7

•

 Unwrap the headlight wire which is attached to the 
headlights, beneath the handle panel. Wind the 
wire around the lower right handle until excess 
slack is removed. 

•

Plug the wire from the headlight into the alternator 
lead located on the right side of the engine, 
beneath the fuel tank. See Figure 7.

Read, understand, and follow

all instructions and warnings on the machine
and in this manual before operating.

The throttle control is located on the engine. It regulates 
the speed of the engine. See Figure 8.

On models so equipped, the fuel shut-off valve, located 
under fuel tank, controls fuel-flow from the gas tank. 
See Figure 8.

The ignition key must be inserted in the switch in order 
for the engine to start. Remove the ignition key when 
the snow thrower is not in use.

The space between the shave plate and the ground can 
be adjusted by positioning the skid shoes. Refer to 

on page 12.

Closed

Open

*If Equipped