iStarUSA TC-1U30FX2 Benutzerhandbuch
Page
4
1. Introduction
1.1 Scope
This specification defines the performance and characteristic for the model of
TC-1U30FX2 power supply.
1.2 General
Description
TC-1U30FX2 is a 300W switching power supply, with an FLEX-ATX form factor,+5V
standby voltage, remote on/off, dual line input capability.
2. AC
Input
2.1 Voltage
Range
Voltage range: 100VAC ~ 240VAC
2.2 Frequency
Range
Frequency range: 47Hz – 63Hz
2.3 Input
Voltage
Waveform
Input Voltage waveform: Sine wave, modified sine wave or square wave
2.4 Input
Current
2.4.1 Steady-state Current
Maximum current at 115 VAC (RMS):
5.0A
Maximum current at 230 VAC (RMS):
2.5A
2.4.2 Cold Start Inrush Current
Maximum inrush current at 115 VAC:
40A
Maximum inrush current at 230 VAC:
50A
* Measured at 25℃ ambient cold start.
2.4.3 Input Over current Protection
The power supply is equipped with a non-reset-able fuse on the AC
input to limit power consumption on a failure within the power supply
module.
Input Fuse Rating:
Voltage 250 V
Current
6.3A
De-activation time 300 ms