Zebra HW46211 Benutzerhandbuch
Page 2-26
110XiIIIPlus Maintenance Manual
13185L-002 Rev. A 1/24/06
Section 2
Operations Overview
Select Print Mode
Print mode settings tell the printer the method of media delivery you wish to use. Be sure
to select a print mode your hardware configuration supports, because some selections
displayed are for optional printer features.
Press the right or left oval key to display other selections.
Press NEXT/SAVE to display MEDIA TYPE.
Select Media Type
The media type parameter specifies the kind of media used. Continuous media requires
that a label length instruction (^LLxxxx) be included in your ZPL or ZPL II label format.
With non-continuous media, the printer feeds media to calculate label length, the distance
between two detections of the interlabel webbing, alignment notch, or hole.
Press the right or left oval key to display other selections.
Press NEXT/SAVE to display SENSOR TYPE.
Select Sensor Type
This parameter tells the printer whether you are using media with a web (gap/space
between labels, notch, or hole) to indicate the separations between labels or a black mark
printed on the back. If your media does not have black marks on the back, leave your
printer at the default (web).
Press the right or left oval key to display other selections.
Press NEXT/SAVE to display PRINT METHOD.
Default: Tear-Off
Selections: Tear-Off, Peel-Off, Rewind, Cutter
Default: Non-Continuous
Selections: Non-Continuous, Continuous
Default: Web
Selections: Web, Mark
PRINT MODE
TEAR OFF
MEDIA TYPE
NON-CONTINUOUS
SENSOR TYPE
WEB