Zebra HW46211 Manual De Usuario

Page 2-26

110XiIIIPlus Maintenance Manual

13185L-002 Rev. A 1/24/06

Section 2

Operations Overview

Select Print Mode

Print mode settings tell the printer the method of media delivery you wish to use. Be sure 

to select a print mode your hardware configuration supports, because some selections 

displayed are for optional printer features.

Press the right or left oval key to display other selections.

Press NEXT/SAVE to display MEDIA TYPE.

Select Media Type

The media type parameter specifies the kind of media used. Continuous media requires 

that a label length instruction (^LLxxxx) be included in your ZPL or ZPL II label format.

With non-continuous media, the printer feeds media to calculate label length, the distance 

between two detections of the interlabel webbing, alignment notch, or hole.

Press the right or left oval key to display other selections.

Press NEXT/SAVE to display SENSOR TYPE.

Select Sensor Type

This parameter tells the printer whether you are using media with a web (gap/space 

between labels, notch, or hole) to indicate the separations between labels or a black mark 

printed on the back. If your media does not have black marks on the back, leave your 

printer at the default (web).

Press the right or left oval key to display other selections.

Press NEXT/SAVE to display PRINT METHOD.

Default: Tear-Off

Selections: Tear-Off, Peel-Off, Rewind, Cutter

Default: Non-Continuous

Selections: Non-Continuous, Continuous

Default: Web

Selections: Web, Mark

PRINT MODE

TEAR OFF

MEDIA TYPE

NON-CONTINUOUS

SENSOR TYPE

WEB