Cisco TRC5 CTS-RMT-TRC5= Benutzerhandbuch
Produktcode
CTS-RMT-TRC5=
16
Deployment Details
August 2012 Series
16
Step 8:
From the command line, set the default level to 2 and add the links
by entering the following commands.
xcommand DefaultValuesSet Level: 2
xcommand DefaultLinksAdd
bye
Step 9:
On the non-master VCS, navigate to
VCS configuration >
Clustering
, enter the following values, and then click
Save
:
• Cluster name—
Cluster1.cisco.local
(same as master)
• Cluster pre-shared key—
[pre-shared key]
(same as master)
• Configuration master—
1
(master is at the Peer 1 IP Address)
• Peer 1 IP address—
10.4.48.130
(master IP address)
• Peer 2 IP address—
10.4.48.131
(this VCS)
Step 10:
Read the Confirm screen, and then click
Yes.
Step 11:
Navigate to
Maintenance > Restart
, click
Restart
system, and then
in the Confirm screen, click
Yes
. After approximately 2 minutes, the system
restarts.
Step 12:
Click
Administrator login
, enter the following values, and then
click
Login
:
• Username—
admin
• Password—
[password]
Step 13:
If there are any configuration warnings, navigate to
Status > Alarms
and read them to determine if any of them require action on your part.
Step 14:
If they do not require action, click
Select all,
and then click
Acknowledge
.
Step 15:
Navigate to
VCS Configuration > Clustering
to confirm the master
VCS is active and the VCS system configuration replication status is listed
as SUCCEEDED.
as SUCCEEDED.
The non-master peer is now configured.
In a VCS cluster environment, the rest of the configuration is
completed on the first (master) VCS. The information entered on
the master is replicated to the non–master peers every minute.
completed on the first (master) VCS. The information entered on
the master is replicated to the non–master peers every minute.
Tech Tip