Cisco TRC5 CTS-RMT-TRC5= User Manual

16

Deployment Details

August 2012 Series

16

Step 8:  

From the command line, set the default level to 2 and add the links 

by entering the following commands.

xcommand DefaultValuesSet Level: 2 

xcommand DefaultLinksAdd

bye

Step 9:  

On the non-master VCS, navigate to 

VCS configuration >

Clustering

, enter the following values, and then click 

Save

: 

•  Cluster name—

Cluster1.cisco.local

 (same as  master)

•  Cluster pre-shared key—

[pre-shared key]

(same as master)

•  Configuration master—

1

  (master is at the Peer 1 IP Address)

•  Peer 1 IP address—

10.4.48.130

(master IP address)

•  Peer 2 IP address—

10.4.48.131

 (this VCS)

Step 10:  

Read the Confirm screen, and then click 

Yes.

Step 11:  

Navigate to 

Maintenance > Restart

, click 

Restart

 system, and then 

in the Confirm screen, click 

Yes

. After approximately 2 minutes, the system 

restarts. 

Step 12:  

Click

Administrator login

, enter the following values, and then 

click 

Login

:

•  Username—

admin

•  Password—

[password]

Step 13:  

If there are any configuration warnings, navigate to

Status > Alarms

 

and read them to determine if any of them require action on your part.  

Step 14:  

If they do not require action, click 

Select all,

 and then click 

Acknowledge

. 

Step 15:  

Navigate to 

VCS Configuration > Clustering

 to confirm the master 

VCS is active and the VCS system configuration replication status is listed 
as SUCCEEDED.

The non-master peer is now configured.

In a VCS cluster environment, the rest of the configuration is 
completed on the first (master) VCS.  The information entered on 
the master is replicated to the non–master peers every minute.