Omnitron iConverter xFF 8699-0-F Merkblatt
Produktcode
8699-0-F
iConverter
iConverter
®
SFP to SFP protocol-transparent fiber converter
■
Supports Ethernet, Fast Ethernet, Gigabit Ethernet,
■
SONET (OC-3/12/48), SDH (STM-1/4/16) and 1x/2x/4x
Fibre Channel applications
Supports SFP Digital Diagnostic Monitoring Interface
■
(DDMI) bus
Provides multimode to single-mode and dual to single-
■
fiber media conversion
Provides wavelength conversion for CWDM applications
■
User-selectable link fault detection modes facilitate
■
quick fault detection, isolation and reporting
Management is available with the addition of a
■
management module to the chassis
SNMP management via
■
NetOutlook
®
provides real-time
port and module information, configuration and trap
notification
Modules are hot-swappable in 19-Module, 5-Module,
■
2-Module or 1-Module chassis
LED displays for immediate visual status of each port
■
Conforms to IEEE 802.3 specifications
■
Lifetime Warranty and free 24/7 Technical Support
■
iConverter
xFF
SFP to SFP Protocol-Transparent Fiber Converter
The iConverter xFF is a protocol-transparent media converter
that provides reliable and cost-effective conversion between
different wavelengths, multimode and single-mode, and dual
and single-fiber.
The iConverter xFF operates as a protocol and rate-transparent
The iConverter xFF operates as a protocol and rate-transparent
device, supporting Small Form Pluggable (SFP) transceivers
with data rates from 1Mbps to 4.25Gbps. The xFF supports a
variety of network protocols, including Ethernet, Fast Ethernet,
Gigabit Ethernet, SONET (OC-3/12/48), SDH (STM-1/4/16)
and 1x/2x/4x Fibre Channel protocols.
The iConverter xFF supports multimode, single-mode and
The iConverter xFF supports multimode, single-mode and
single-fiber SFP transceivers. SFPs allow adaptability to
different fiber types, distances and wavelengths, providing
maximum flexibility across a variety of network architectures
and topologies. The same xFF media converter can utilize
a variety of SFPs for different wavelengths and distances,
reducing costs and simplifying inventories.
SFP transceivers enable the xFF to operate as a Coarse
SFP transceivers enable the xFF to operate as a Coarse
Wave Division Multiplexing (CWDM) transponder, which
converts an optical signal from legacy fiber equipment to a
specific CWDM wavelength. CWDM technology increases
the bandwidth capacity of the fiber infrastructure by overlaying
multiple signals, each using a different wavelength, over an
existing fiber link.
There is no manual configuration required with the plug-and-
There is no manual configuration required with the plug-and-
play iConverter xFF. Connect the fiber cables to the appropriate
interface and the installation is complete.
The xFF features user-selectable Link Propagate and Remote
The xFF features user-selectable Link Propagate and Remote
Fault Detection modes to facilitate quick fault detection,
isolation and reporting.
The iConverter xFF is available as a compact, unmanaged
The iConverter xFF is available as a compact, unmanaged
standalone unit, or a chassis plug-in module that can be
managed with a management module installed in the chassis.
The hot-swappable, plug-in module can be mounted in a 19 or
5-Module chassis with any combination of redundant AC and
DC power supplies. It can also be mounted in a 2-Module AC
or DC powered chassis, or in a 1-Module chassis with AC or
DC power input.
The standalone iConverter xFF is an unmanaged wall-mount
The standalone iConverter xFF is an unmanaged wall-mount
unit. The wall-mount models are DC powered and are available
with an external AC/DC power adapter, or a terminal connector
for DC power.
SFPs not included
Key Features