Omnitron iConverter xFF 8699-0-F Merkblatt
Produktcode
8699-0-F
ManageMent
Management of the plug-in module is accomplished by using
a Management Module¹ (such as an iConverter NMM2 or
10/100M2) that provides monitoring, configuration and trap
notification. The management module can be accessed via
SNMP, Telnet, or serial port. The SNMP-based management
is accomplished via Omnitron’s intuitive, graphic-oriented
management software or third party SNMP management
software, while the Telnet and the serial interfaces have an
easy-to-use, menu-driven interface.
Real-time xFF parameters that can be monitored include power,
Real-time xFF parameters that can be monitored include power,
link, data receive status, module type and model, hardware
and software revisions, serial numbers and a user-defined
identifier.
The user can override the xFF module’s physical DIP-
The user can override the xFF module’s physical DIP-
switch settings by using SNMP or Telnet to configure
DIP-switch-selectable parameters such as Link Propagate or
Remote Fault Detection.
In addition to all standard iConverter SNMP traps such as
In addition to all standard iConverter SNMP traps such as
module insertion and removal, the xFF modules can generate
traps on port state changes including link-up and link-down.
Trap monitoring of specific events can be selectively enabled
or disabled by the network administrator.
¹ For complete management support, use a M2 series module
(NMM2, GX/TM2, 2GXM2, 10/100M2, 2FXM2) or higher.
Page 2
speciFications
iConverter
xFF
Model Type
iConverter
xFF
Protocols
Protocol Transparent up to 4.25Gbps:
Ethernet (100BASE-X, 1000BASE-X)
SONET (OC-3, OC-12, OC-48)
SDH (STM-1, STM-4, STM-16)
Fibre Channel (1x, 2x, 4x)
Ethernet (100BASE-X, 1000BASE-X)
SONET (OC-3, OC-12, OC-48)
SDH (STM-1, STM-4, STM-16)
Fibre Channel (1x, 2x, 4x)
Compliance
UL, FCC Class A, CE
Fiber Connectors
SFP - LC
Controls
LP, RFD
LED Displays
Power, FO link (2)
Dimensions
Plug-in:
Standalone:
Standalone:
W 0.85” x D 4.5” x H 2.8”
W 3.8” x D 4.8” x H 1.0”
W 3.8” x D 4.8” x H 1.0”
Weight
Plug-in:
Standalone
Standalone
without Power Adapter:
Standalone
Standalone
with Power Adapter:
8 oz.
1.0 lb.
1.5 lb.
DC Power Connector
Plug-in:
Standalone:
Standalone:
Power supplied by backplane
2.5mm Barrel Connector or
2.5mm Barrel Connector or
2 Pin Terminal Connector
DC Power
Requirement (typical)
Plug-in:
Standalone:
Standalone:
0.5A @ 3.3VDC
5 - 32VDC
5 - 32VDC
0.3A @ 9VDC
(1.0A max)
AC Power Adapter
[US]
Plug-in:
Standalone:
Standalone:
N/A
100 - 120VAC/60Hz
100 - 120VAC/60Hz
0.05A @ 120VAC
AC Power Adapter
[Universal]
Plug-in:
Standalone:
Standalone:
N/A
100 - 240VAC/50 to 60Hz
100 - 240VAC/50 to 60Hz
0.05A @ 120VAC
Temperature
Standard:
0° to 50° C
Wide:
- 40° to 60° C
Storage:
- 40° to 80° C
Humidity
5 to 95% (non-condensing)
Altitude
- 100m to 4000m
MTBF (hrs)
Plug-in:
1,300,000
Standalone
w/ US Power Adapter:
250,000
Standalone
w/ Universal Adapter:
100,000
ordering inForMation
<Blank>
Standard Operating Temperature Range Model
W
Wide Operating Temperature Range Model
<Blank>
Plug-in Module
D
Wall-Mount with External US AC Power Supply
E
Wall-Mount with External Universal AC Power Supply
F
Wall-Mount with DC Terminal Power
8699 - 0 - x x
Order the appropriate SFPs separately.
©2010 Omnitron Systems Technology, Inc. All rights reserved.
iConverter
and
NetOutlook
are registered trademarks of Omnitron Systems Technology, Inc.
Trademarks are owned by their respective companies. Specifications subject to change without notice.
091-18699-001F
9/10