ZyXEL Prestige 202H Plus ISDN Router 91-003-154001B Benutzerhandbuch

P-202H Plus v2 User’s Guide

57

Chapter 4 LAN Setup

Figure 16   LAN Setup 

The following table describes the fields in this screen.  

Table 7   LAN Setup

DHCP

DHCP

If set to Server, your ZyXEL Device can assign IP addresses, an IP default 

gateway and DNS servers to Windows 95, Windows NT and other systems that 

support the DHCP client.
If set to None, the DHCP server will be disabled. 
If set to Relay, the ZyXEL Device acts as a surrogate DHCP server and relays 

DHCP requests and responses between the remote server and the clients. Enter 

the IP address of the actual, remote DHCP server in the Remote DHCP Server 

field in this case. 
When DHCP is used, the following items need to be set: 

Client IP Pool 

Starting Address

This field specifies the first of the contiguous addresses in the IP address pool.

Size of Client IP 

Pool

This field specifies the size, or count of the IP address pool.

Primary DNS Server
Secondary DNS 

Server

This field is not available when you set DHCP to None or Relay.
Type the IP addresses of the DNS servers. The DNS servers are passed to the 

DHCP clients along with the IP address and the subnet mask. Leave these 

entries at 0.0.0.0 if they are provided by a WAN DHCP server.

Remote DHCP 

Server

If Relay is selected in the DHCP field above then enter the IP address of the 

actual remote DHCP server here.

TCP/IP

IP Address

Enter the IP address of your ZyXEL Device in dotted decimal notation, for 

example, 192.168.1.1 (factory default).