ZyXEL Prestige 202H Plus ISDN Router 91-003-154001B 사용자 설명서
제품 코드
91-003-154001B
P-202H Plus v2 User’s Guide
57
Chapter 4 LAN Setup
Figure 16 LAN Setup
The following table describes the fields in this screen.
Table 7 LAN Setup
LABEL
DESCRIPTION
DHCP
DHCP
If set to Server, your ZyXEL Device can assign IP addresses, an IP default
gateway and DNS servers to Windows 95, Windows NT and other systems that
support the DHCP client.
If set to None, the DHCP server will be disabled.
If set to Relay, the ZyXEL Device acts as a surrogate DHCP server and relays
If set to None, the DHCP server will be disabled.
If set to Relay, the ZyXEL Device acts as a surrogate DHCP server and relays
DHCP requests and responses between the remote server and the clients. Enter
the IP address of the actual, remote DHCP server in the Remote DHCP Server
field in this case.
When DHCP is used, the following items need to be set:
When DHCP is used, the following items need to be set:
Client IP Pool
Starting Address
This field specifies the first of the contiguous addresses in the IP address pool.
Size of Client IP
Pool
This field specifies the size, or count of the IP address pool.
Primary DNS Server
Secondary DNS
Secondary DNS
Server
This field is not available when you set DHCP to None or Relay.
Type the IP addresses of the DNS servers. The DNS servers are passed to the
Type the IP addresses of the DNS servers. The DNS servers are passed to the
DHCP clients along with the IP address and the subnet mask. Leave these
entries at 0.0.0.0 if they are provided by a WAN DHCP server.
Remote DHCP
Server
If Relay is selected in the DHCP field above then enter the IP address of the
actual remote DHCP server here.
TCP/IP
IP Address
Enter the IP address of your ZyXEL Device in dotted decimal notation, for
example, 192.168.1.1 (factory default).