Innominate mGuard bladeBase HW-104500 Merkblatt

Innominate

®

 and mGuard

®

 are registered trademarks of Innominate Security Technologies AG. For specifi c technologies used in mGuard

®

 products, patents have been issued to Innominate Security Techno-

logies AG, or have been applied for by them. All other trademarks, brands and names are the property of their respective owners. Further information available under www.innominate.com/trademarks. Changes 
to product specifi  cations, typing errors and other errors reserved. Version: January 2012.

Innominate, a Phoenix Contact Company, is a leading supplier of components and solutions for controlled and secured communication in industrial networks. 

The German company specializes in the protection of networked industrial systems and the secure remote diagnosis and maintenance of machinery and equip-

ment over the Internet. Its mGuard product line of network security appliances provides router, fi rewall, virtual private network (VPN), as well as quality of service 

(QoS) functionalities and helps with intrusion detection and antivirus protection. The mGuard portfolio is complemented by a highly scalable device management 

software. Innominate products are marketed worldwide under the mGuard brand through system integrators and OEM partners.

Further information can be found at: 

Platform

Network interfaces

Other interfaces

Drives

High availability

Power supply

Power consumption

Temperature range

Air humidity range

Protection class

Dimensions (H x W x D)

Weight

Firmware compatibility

Data throughput (router | fi rewall)

Hardware-based encryption

Encrypted VPN throughput (AES-256)

Management support

Diagnostic

Conformity

Intel network processor

optionally with 533 MHz or 266 MHz clock rate

1 LAN port | 1 WAN port

Ethernet IEEE 802.3 10 / 100 Base TX |

RJ 45 | Full Duplex | Auto-MDIX

serial RS232, RJ11 socket

–

optional: VPN | router & fi rewall

via bladebase: 100 - 240 V AC at 50 / 60 Hz

blade: typically 3 W | bladebase: typically 42 W

+ 5 - + 40 °C  (operation)

– 20 - + 70 °C  (storage)

10 - 95 %  (operation),  non-condensing

IP 20

blade: 100 x 26 x 160 mm | bladebase: 133 x 483 x 235 mm (3 RU)

blade: 245 g | bladepack: 7.7 kg

mGuard v5.0 or higher;

Innominate recommends to always use current fi rmware versions and 

patch releases; for scope of functions see relevant fi rmware datasheet

99 Mbit / s bi-directional | 99 Mbit / s bi-directional

DES | 3DES | AES-128 / 192 / 256

35  Mbit / s  (blade / 256)  bi-directional  |

70  Mbit / s  (blade / 533)  bi-directional

Web GUI (HTTPS) | Command Line Interface (SSH) | SNMP

v1 / 2 / 3 | central device management software

LEDs (2 x LAN, 2 x WAN in combination for boot process,

system errors, Ethernet status, recovery mode) | log fi le |

remote syslog

CE | FCC

Please note the safety instructions in the product documentation supplied (Quick Installation Guide).

mGuard  blade / 533 

HW-104050

mGuard  blade / 266 

HW-104020

mGuard bladebase 

HW-104500

mGuard  bladepack / 533 

HW-104850

mGuard  bladepack / 266 

HW-104820

 Don’t give attackers a chance! 

The highly-effective security components of the 

mGuard security appliance provide your systems, 

machines and communication channels with the 

highest level of protection against attacks, so that 

you can sleep at night.

 Avoid long-winded coordination! 

The self-suffi cient mGuard security appliance, with 

its patented mGuard stealth mode, can be 

integrated quickly and without repercussions. In 

the process, the behavior of the mGuard is 

completely transparent, and it uses the IP address 

of the system it is protecting. Thus the mGuard 

cannot be detected by an attacker, and therefore 

cannot be compromised.

 Increase your security without impairing 

the response times! The extremely high throughput 

rates of the mGuard enable you to have fast and at 

the same time safe IP communication with all 

machines and systems.

 Protect your computers! The 

mGuard cifs integrity monitoring is an industry-

compatible alternative to traditional anti-virus 

solutions that reliably detects malware. Without the 

risk of downtime due to false alarms, and with a 

considerable load reduction for the systems being 

protected.

 Don’t get left behind! You can 

meet new security and market requirements 

quickly and easily with the aid of regular upgrades 

to the mGuard fi rmware.

 Increase your effi ciency level!

The optionally available device manager makes it 

easy for you to centrally manage and perform a 

templatebased roll-out of all your mGuard devices.