Star Micronics TSP654IID-24 39449590 Benutzerhandbuch

Produktcode

39449590

- 12 -

PAIR

RST

PAIR

RST

PAIR

RST

PAIR button

RST button

LED

3-7. Bluetooth Settings

(For Bluetooth Interface Models only)

(2) Pairing will be possible for 60 seconds from when the LED begins flashing green.

During this time, perform pairing from the master device.

Device name: Star Micronics (default)

(3) After performing pairing, wait until the LED stops flashing green, or turn the printer off and back on again, to enable

the connection.

In the iOS devices, after pairing, the LED will automatically begin flashing blue, and the printer will be automatically
connected.

(4) Connect to the printer from the master device application and perform printing. If the printing is successful, the

pairing process has been completed.

Note: The printer performs various processes immediately after connecting to or disconnecting from a master

device.

Please wait approximately 0.1 seconds after connecting, and approximately 0.5 seconds after disconnecting,
before beginning communications with the printer. This wait will ensure that the next action you perform
is executed correctly.

Pair the printer with the master device by following the procedure below.

3-7-1. Pairing using SSP (Simple Secure Pairing) [Default]

(1) After turning the printer's power switch on, press and hold the PAIR button on the rear interface of the printer for 5

seconds or more, and then release it. The LED will flash green.

<LED> Indicates the status of the Bluetooth interface.

Green (on): Not connected.

Green (flashing): Ready to start pairing.

Blue (on): Connected.

Purple (flashing): Auto connection ON.