Star Micronics TSP654IID-24 39449590 Benutzerhandbuch

- 13 -

ERROR

FEED

POWER

TSP650

Enter the following information in the master device if it does not support SSP, or when otherwise necessary.

           PIN:   

1234 (default)

           Device name:  Star Micronics (default)

It is recommended that you change the PIN code for greater security.
For details regard changing the PIN code, please see the “Software Manual -Star Bluetooth Utility- ”. 

Each time the wireless connection is disconnected while communicating with upper-level iOS devices including iPad over 
Bluetooth, it is necessary to move back to the Bluetooth setting screen in the upper-level iOS device and tap the desired 
printer name again to build a connection. This is an iOS specification. 
In order to save this labor, this printer is equipped with the Auto Connection function that automatically requests a con-
nection from an upper-level iOS device that was connected to the printer last time.

The default setting of this function may differ according to the printer model you are using. 
Confirm the default settings for your printer, as well as the use examples for ON/OFF settings, and then make the settings 
to match your purpose.
You can also check the current ON/OFF setting by performing self-printing.

(1)  While the printer cover is closed, hold down the FEED button 

on the operation panel, and then turn on the power switch.

(2) Self-printing starts, and the settings for F/W Version, Dip-

Switch, Memory Switch, and so on are printed. 

(3)  If you keep holding down the FEED button after self-printing 

is complete, the current ON/OFF settings are printed after the 
interface information.