Defender 21031 Benutzerhandbuch

This menu allows you to select and configure the HDD and PTZ camera (not included).

This menu option gives you information about your Hard Disk Drive (HDD), allows you to enable overwrite mode, and 

format the hard drive and/or USB drive. 

your options are: 
•  State:  

  Displays the current operating status of the hard drive. If the hard drive is functioning     

 

  normally it will display OK.

•  Avail/Total:  

  Tells you how much HDD space that you have in total and is still available to record.

•  Avail Time:             Amount of remaining time available to record.
•  Select :                     Select which HDD to modify.

When the overwrite mode is enabled, the DVR will record over the oldest footage once the HDD is full  instead of 

stopping the recording once it is full. Overwriting allows the DVR to never stop recording. If you want to stop recording 

once the HDD is full, set overwrite to DISABLE.

To enable/disable ovErwriTE : 
1.  Select the drop down menu beside OVERWRITE. 
2.  Select AUTO to turn OVERWRITE on, you can also set the DVR to overwrite after just a 

few hours or days, or choose DISABLE to turn OVERWRITE off. 

3.     Select APPLY to save settings.