Intel MFS5000SI MFS5000SIB Benutzerhandbuch

Produktcode

MFS5000SIB

2BFunctional Architecture

Intel® Compute Module MFS5000SI TPS

3.1.3.4.2.1

Single Branch Mode Sparing

Channel A

Channel B

Channel C

Channel D

Branch 0

Branch 1

Intel® 5000P/5000X Memory Controller Hub

Slot 1

Slot 2

DIMM_C2

DIMM_C1

DIMM_D2

DIMM_D1

DIMM_A1

DIMM_A2

DIMM_B1

DIMM_B2

Figure 9. Single Branch Mode Sparing DIMM Configuration

DIMM_A1 and DIMM_B1 must be identical in organization, size and speed.

DIMM_A2 and DIMM_B2 must be identical in organization, size and speed.

DIMM_A1 and DIMM_A2 should be identical in organization, size and speed. See note below.

DIMM_B1 and DIMM_B2 should be identical in organization, size and speed. See note below.

Sparing should be enabled in the BIOS setup.

The BIOS will configure Rank Sparing Mode.

The larger of the pairs {DIMM_A1, DIMM_B1} and {DIMM_A2, DIMM_B2} will be selected as the

spare pair unit.

Note:

Use of identical memory is recommended with the Intel

Compute Module MFS5000SI. Mixing

memory type, size, speed, rank and/or vendors is not validated and is not supported with this product.
Refer to section 3.1.3.2 for supported and nonsupported memory features and configuration information.

3.1.3.4.2.2

Dual Branch Mode Sparing

Dual branch mode sparing requires that all eight DIMM slots be populated and compliant with the
following population rules.

DIMM_A1 and DIMM_B1 must be identical in organization, size and speed.

DIMM_A2 and DIMM_B2 must be identical in organization, size and speed.

DIMM_C1 and DIMM_D1 must be identical in organization, size and speed.

DIMM_C2 and DIMM_D2 must be identical in organization, size and speed.

DIMM_A1 and DIMM_A2 should be identical in organization, size and speed. See note below.

DIMM_B1 and DIMM_B2 should be identical in organization, size and speed. See note below.

DIMM_C1 and DIMM_C2 should be identical in organization, size and speed. See note below.

DIMM_D1 and DIMM_D2 should be identical in organization, size and speed. See note below.

Sparing should be enabled in BIOS setup.

BIOS will configure Rank Sparing Mode.

The larger of the pairs {DIMM_A1, DIMM_B1} and {DIMM_A2, DIMM_B2} and {DIMM_C1,

DIMM_D1} and {DIMM_C2, DIMM_D2} will be selected as the spare pair units.

Revision 1.4

Intel order number: E15154-007