Fluke 1735 USB Mains-analysis device, Mains analyser 2583398 Benutzerhandbuch

5 

The accompanying 1735 CD-ROM contains software and additional product 
information, including: 

•  International Users Manuals. The Users Manual contains complete usage 

instructions for the Logger. 

•  Power Log PC software and Users Manual. Power Log is a simple 

application designed to help you get the most from the Logger. Follow the 
directions on the CD-ROM to install the software. 

•  1735 Upgrade Utility for future Logger firmware upgrades 
•  USB Drivers 

The Logger operates continuously with the provided charging adapter or for 
several hours with the built-in battery. The battery eliminates possible power 
interruptions during logging sessions and provides operating power during 
handheld troubleshooting and signal analysis. 

When you operate the Logger with the ac adapter, the battery is automatically 
charged. On the display, the symbol for “plugged-in” or battery is displayed 
accordingly.  

When LO-BAT is indicated, attach the ac adapter to recharge the battery. It 
requires about 4 hours to recharge a fully-discharged battery. The Logger’s 
automatic charging circuit makes it impossible to over charge the battery. 

Fluke flexi-sets or current clamps are automatically detected by the Logger 
when the Logger is turned on. If you change current probes, turn the Logger 
off and on again so the Logger can recognize the new probe.