Gmw TG UNI 1AVDE-tester DIN VDE 0701/ 0702 61000 00200 Benutzerhandbuch
Produktcode
61000 00200
1. Safety information
Tests on the electrical safety of electrical appliances may only be carried
out by qualified electricians or under their supervision. Carefully read the
following safety information before commissioning the TG uni 1 appliance
tester (referred to as appliance tester or tester in the following).
Tests on the electrical safety of electrical appliances may only be carried
out by qualified electricians or under their supervision. Carefully read the
following safety information before commissioning the TG uni 1 appliance
tester (referred to as appliance tester or tester in the following).
Symbols used in the operating manual and on the tester:
Warning:hazardous situation. Follow the operating manual.
Caution! Dangerous voltage, danger of electric shock.
Note. Make sure you follow the manual.
CE
CE mark of conformity.
The operating manual contains information and notes which are
necessary for the safe operation and use of the tester. Before use
(commissioning / installation) of the tester the operating manual
should be carefully read through and followed in all points.
necessary for the safe operation and use of the tester. Before use
(commissioning / installation) of the tester the operating manual
should be carefully read through and followed in all points.
If the manual is not observed or if you fail to observe the warnings
and notes, serious injury to the user and damage to the tester can
occur.
and notes, serious injury to the user and damage to the tester can
occur.
All the technical data and quoted standards in this manual are up-
to-date at the time of going to press and have been determined to
the best of our knowledge, nevertheless this data may be subject
to errors and printing errors. Therefore no legal responsibility or
any other liability can be accepted for incorrect information or
the conseqences of this information.
The definitive document for carrying out tests is the
original version of the respective regulation or standard.
There is no intention to
to-date at the time of going to press and have been determined to
the best of our knowledge, nevertheless this data may be subject
to errors and printing errors. Therefore no legal responsibility or
any other liability can be accepted for incorrect information or
the conseqences of this information.
The definitive document for carrying out tests is the
original version of the respective regulation or standard.
There is no intention to
infringe
on any existing patents and
other property rights with this publication.
2. Introduction
You have acquired a high-grade device from the company Gossen Müller &
Weigert (GMW), with which you can carry out repeatable measurements
over a very long period of time. The product was calibrated during the
manufacturing process in accordance with the specified operating
procedures. All quality-relevant activities and processes carried out in GMW
are permanently monitored as part of the quality management system in
accordance with DIN EN ISO 9001:2000.
You have acquired a high-grade device from the company Gossen Müller &
Weigert (GMW), with which you can carry out repeatable measurements
over a very long period of time. The product was calibrated during the
manufacturing process in accordance with the specified operating
procedures. All quality-relevant activities and processes carried out in GMW
are permanently monitored as part of the quality management system in
accordance with DIN EN ISO 9001:2000.
4
Operating manual for the TG uni 1 appliance tester
Safety information
Safety information
&
&
&
&
&
&
&
&
&
&
&
&
&
&
&
&
&
&
&
&