Crydom DRA-CN240A24 Din Rail Mount Electronic Power Relay DRA-CN240A24 Current load 2 A Switching voltage 24 - 280 Vac DRA-CN240A24 Merkblatt
Produktcode
DRA-CN240A24
DRSCN Series
DIN rail mountable sockets
FEATURES
The DRSCN sockets provide a convenient and easy way to install Crydom CN series Solid State Relays
on a standard 35mm DIN rail. For additional information visit www.crydom.com.
on a standard 35mm DIN rail. For additional information visit www.crydom.com.
Sockets are fully compatible with CN series SSRs
6.2mm wide socket
LED input status indicator
Socket clip fits all standard 35mm DIN rails
6.2mm wide socket
LED input status indicator
Socket clip fits all standard 35mm DIN rails
DRSCN
120
Series
Socket Input Voltage
05: 05 VDC
24: 24 VDC
120: 120 V AC/DC
240: 240 V AC/DC
05: 05 VDC
24: 24 VDC
120: 120 V AC/DC
240: 240 V AC/DC
PART NUMBER NOMENCLATURE
RELAY/SOCKET COMPATIBILITY
A B
WIRING DIAGRAM
C, D
C
D
INSTALLATION INSTRUCTIONS
Match CN series SSR to appropriate DRSCN socket part number to create an Assembly
Insert the CN SSR on the socket
Mount the socket on the DIN rail
Wire the socket to the control side. AWG #24-14 Solid, AWG #24-14 Stranded. (0.14-2.5mm2)
Wire the socket to the load side. AWG #24-14 Solid, AWG #24-14 Stranded. (0.14-2.5mm2)
If multiple units are installed be sure to follow derating curves for assemblies
Insert the CN SSR on the socket
Mount the socket on the DIN rail
Wire the socket to the control side. AWG #24-14 Solid, AWG #24-14 Stranded. (0.14-2.5mm2)
Wire the socket to the load side. AWG #24-14 Solid, AWG #24-14 Stranded. (0.14-2.5mm2)
If multiple units are installed be sure to follow derating curves for assemblies
RISQUE D'ELECTROCUTION, D'EXPLOSION OU D'ARC ELECTRIQUE
•
Coupez l'alimentation avant de travailler sur cet appareil.
•
ሞ֡ፕُยԢኮമ൩ံ࠲Կۉᇸă
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
•
Turn off power supply before working on this equipment.
Le non-respect de ces instructions provoquera la mort ou des blessures
graves.
graves.
Failure to follow these instructions will result in death or
serious injury.
serious injury.
Il mancato rispetto di queste istruzioni provocherà morte o
gravi infortuni.
gravi infortuni.
Si no se siguen estas instrucciones provocará lesiones graves
o incluso la muerte.
o incluso la muerte.
Die Nichtbeachtung dieser Anweisungen führt zu Tod oder schwerer
Körperverletzung.
Körperverletzung.
STROMSCHLAG-, EXPLOSIONS- ODER LICHTBOGENGEFAHR
•
Vor dem Arbeiten an dem Gerät dessen Stromversorgung abschalten.
RISCHIO DI SCOSSA ELETTRICA, DI ESPLOSIONE O DI OFTALMIA DA FLASH
•
Scollegare l'apparecchio dalla presa di corrente prima di qualsiasi intervento.
RIESGO DE ELECTROCUCIÓN, EXPLOSIÓN O ARCO ELÉCTRICO
Desconecte toda alimentación antes de realizar el servicio.
٪ሞۉऍĂԖቊईۉࢷຮླ၃
ැփፏኄၵຫLjీࣷڞዂჹዘڦටวฅ࡞ฯຶྨă
DANGER / DANGER / GEFARH / PELIGRO / PERICOLO /
MECHANICAL DIMENSIONS
Please read all installation instructions before using the sockets and relays.
SSR PN
DR Socket PN
CN024D05
CN048D05
CN240A05
CN048D05
CN240A05
CN024D24
CN048D24
CN240A24
CN048D24
CN240A24
CN024D60
CN048D60
CN240A60
CN048D60
CN240A60
CN024D60
CN048D60
CN240A60
CN048D60
CN240A60
DRSCN05
DRSCN24
DRSCN120
DRSCN240
Control
Load
A1+
14
A2-
(13+)11
DRSCN24
Maximum Socket Rating:
Input: U
Input: U
N
= 24VDC
Output: max. 250V/6A
Plug in Relay Options:
Solid State Relay: CN024D24
Solid State Relay: CN024D24
CN048D24
CN240A24
CN240A24
SSR Ratings should not exceed socket rating
14
11
A1+
A2-
14
13+
A1+
A2-
DC Output
AC Output
R
NC
Socket Part Number
3.15 in
[80.0 mm]
3.64 in
[92.6 mm]
0.24 in
[6.1 mm]
A1+
14
A2-
(13+)11
DRSCN24
Maximum Socket Rating:
Input: U
Input: U
N
= 24VDC
Output: max. 250V/6A
Plug in Relay Options:
Solid State Relay: CN024D24
Solid State Relay: CN024D24
CN048D24
CN240A24
CN240A24
SSR Ratings should not exceed socket rating
14
11
A1+
A2-
14
13+
A1+
A2-
DC Output
AC Output
R
NC
Socket Part Number
24 VDC 2A/240VAC
CN240A24
A2- A1+
11
14
R
A1+
11
14
A2-
For sockets intended for AC input control voltage, the AC line can be wired to either DRS socket
terminal A1+ or terminal A2-. Proper polarity must be observed for DC input control voltage sockets
being terminal A1+ positive with respect to terminal A2-.
terminal A1+ or terminal A2-. Proper polarity must be observed for DC input control voltage sockets
being terminal A1+ positive with respect to terminal A2-.
For AC loads, the AC line can be wired to either DRS socket terminal 11 or terminal 14. The AC load
may also be wired on either the line or neutral side of the SSR. For DC loads, the proper polarity
must be observed for the power supply, load and DRS socket with terminal 13 being positive with
respect to terminal 14.
may also be wired on either the line or neutral side of the SSR. For DC loads, the proper polarity
must be observed for the power supply, load and DRS socket with terminal 13 being positive with
respect to terminal 14.
A
B
Installing a CN series solid state relay in a socket that does not have matching input/output
specifications may result in damage to either the relay, socket, or both, and/or in non-operation.
specifications may result in damage to either the relay, socket, or both, and/or in non-operation.
Maximum output rating for DRSCN Series sockets is 250V / 6 Amps regardless of chosen SSR.
Rev: 021910