Gw Instek AFG-2025 Function Generator, Frequency Generator AFG-2025 Datenbogen
Produktcode
AFG-2025
REMOTE INTERFACE
85
Selecting the USB Remote Interface
The AFG-2000 uses a USB interface for remote control. Connecting
to USB
to USB
USB
configuration
configuration
PC side connector
Type A, host
AFG-2000 side
connector
connector
Type B, slave
Speed
1.1/2.0 (full speed)
Panel Operation
1. Connect the
Type B USB—USB-A cable
from the PC to the type B
USB port on the rear panel.
from the PC to the type B
USB port on the rear panel.
2. When the PC asks for the USB driver, select
3. The USB icon will appear when the USB
connection is active.
Remote control terminal connection
Terminal
application
application
Invoke the terminal application such as Hyper
Terminal. Make note of the COM port, baud rate,
stop bit, data bit, and parity accordingly from the
Windows Device Manager.
To check the COM port settings, see the Device
Manager in the PC. For WinXP, Control panel →
System → Hardware tab.
Terminal. Make note of the COM port, baud rate,
stop bit, data bit, and parity accordingly from the
Windows Device Manager.
To check the COM port settings, see the Device
Manager in the PC. For WinXP, Control panel →
System → Hardware tab.