DJI Quadcopter RtF incl. GPS, incl. camera Inspire 1 with 2RC Datenbogen
Produktcode
Inspire 1 with 2RC
38
©
2014 DJI. All Rights Reserved.
Gimbal and Camera
INSPIRE 1
User Manual
Follow Mode
The angle between Gimbal’s orientation and aircraft’s nose remains
constant at all times. One user alone can control the pitch motion of the
Gimbal, but a second user is required to control the pan motion using a
second remote controller.
FPV Mode
The Gimbal will lock to the movements of the aircraft to provide a First-
Person-View flying experience.
Free Mode
The Gimbal’s motion is independent of the aircraft’s orientation. One user
alone can control the pitch motion of the Gimbal, but a second user is
required to control the pan motion using a second remote controller.
Re-alignment
Tap to force the Gimbal orientation to re-align with aircraft’s orientation
by panning from gimbal’s current orientation. Pitch angle will remain
unchanged during the re-alignment.
Gimbal motor error may occur in these situations: (1) Gimbal is placed on uneven ground. (2)
Gimbal has received an excessive external force, e.g. a collision. Please take off from flat, open
ground and protect the gimbal after powering up.
Flying in heavy fog or cloud may make the gimbal wet, leading to a temporary failure. The
gimbal will recover when it dries out.
Pitch
Pan
Gimbal Operation Modes
Three Gimbal operation modes are available. Switch between the different operation modes on the
Camera page of the DJI Pilot App. Note that your mobile device must be connected to the remote
controller for changes to take effect. Refer to the table below for details: