DJI Quadcopter RtF incl. GPS, incl. camera Inspire 1 with 2RC Hoja De Datos

©

 2014 DJI. All Rights Reserved. 

Gimbal and Camera

INSPIRE 1

  User Manual

Follow Mode 

The angle between Gimbal’s orientation and aircraft’s nose remains 

constant at all times. One user alone can control the pitch motion of the 

Gimbal, but a second user is required to control the pan motion using a 

second remote controller.

FPV Mode 

The Gimbal will lock to the movements of the aircraft to provide a First-

Person-View flying experience. 

Free Mode

The Gimbal’s motion is independent of the aircraft’s orientation. One user 

alone can control the pitch motion of the Gimbal, but a second user is 

required to control the pan motion using a second remote controller. 

Re-alignment  

Tap to force the Gimbal orientation to re-align with aircraft’s orientation 

by panning from gimbal’s current orientation. Pitch angle will remain 

unchanged during the re-alignment.

      

 Gimbal motor error may occur in these situations: (1) Gimbal is placed on uneven ground. (2) 

Gimbal has received an excessive external force, e.g. a collision. Please take off from flat, open 

ground and protect the gimbal after powering up. 

  Flying in heavy fog or cloud may make the gimbal wet, leading to a temporary failure. The 

gimbal will recover when it dries out.

Pitch  

Pan

Gimbal Operation Modes

Three Gimbal operation modes are available. Switch between the different operation modes on the 

Camera page of the DJI Pilot App. Note that your mobile device must be connected to the remote 

controller for changes to take effect. Refer to the table below for details: