Canon EOS 1DS MARK II 9443A009 Gebrauchsanleitung
Produktcode
9443A009
67
To focus a peripheral subject not covered by the Area AF ellipse, follow
the procedure below. This technique is called focus lock.
Focus lock works only in the One-Shot AF mode.
the procedure below. This technique is called focus lock.
Focus lock works only in the One-Shot AF mode.
1
Aim the Area AF or AF point over the subject and press
the shutter button halfway to focus.
the shutter button halfway to focus.
2
Keep pressing the shutter button halfway and
recompose the picture as desired.
recompose the picture as desired.
3
Take the picture.
Focusing an Off-Center Subject
¡
If focus cannot be achieved, the focus confirmation light <
o
> in the
viewfinder will blink. If this occurs in the One-Shot AF mode, the picture
cannot be taken even if the shutter button is pressed fully. Recompose
the picture and try and focus again. Or see “When Autofocus Fails
(Manual Focusing)” (p.75).
cannot be taken even if the shutter button is pressed fully. Recompose
the picture and try and focus again. Or see “When Autofocus Fails
(Manual Focusing)” (p.75).
¡
In the AI Servo AF mode when the AF point selection is automatic, the
camera first uses the center AF point to focus. During autofocusing, if the
subject moves away from the center AF point, focus tracking continues as
long as the subject is covered by the Area AF ellipse. The active AF point
does not light.
camera first uses the center AF point to focus. During autofocusing, if the
subject moves away from the center AF point, focus tracking continues as
long as the subject is covered by the Area AF ellipse. The active AF point
does not light.
¡
In the AI Servo AF mode, when focus is achieved, the viewfinder’s focus
confirmation light does not light and the beeper does not sound.
confirmation light does not light and the beeper does not sound.