Canon EOS 1DS MARK II 9443A009 Gebrauchsanleitung
Produktcode
9443A009
69
Manual selection limited to 11 AF points
(p.151)
¡
Since the selectable AF points are
limited to 11, you can better
concentrate on framing the subject.
limited to 11, you can better
concentrate on framing the subject.
¡
The AF point selection procedure is
the same as explained in steps 1 and
2.
the same as explained in steps 1 and
2.
Manual selection limited to 9 AF points
(p.151)
¡
The center AF point and 8 peripheral
AF points are selectable.
AF points are selectable.
¡
Selecting a horizontal AF point is the
same as explained in steps 1 and 2.
Selecting an AF point beyond a
peripheral AF point will set the
automatic selection mode.
same as explained in steps 1 and 2.
Selecting an AF point beyond a
peripheral AF point will set the
automatic selection mode.
¡
To select a peripheral AF point, press
the <
the <
S
> button and turn the <
5
>
dial.
¡
To select a vertical AF point, you can also press the <
S
> button, then
hold down the <
P
> button and turn the <
6
> dial.
¡
If two AF points (
hh
) light up, both AF points will be used for autofocusing.
If you then select the left or right AF point, only that AF point will be
active.
active.
C.Fn-13-1, 2
C.Fn-13-3
With C.Fn-13-1/2/3, all 45 AF points will be available for automatic selection.