Texas Instruments DAC8551EVM Evaluation Module DAC8551EVM DAC8551EVM Datenbogen
Produktcode
DAC8551EVM
www.ti.com
2.2
EVM Performance
PCB Design and Performance
Figure 8. Drill Drawing
The EVM performance test is performed using a high-density DAC bench test board, an Agilent 3458A
digital multimeter, and a PC running the LabVIEW™ software. The EVM board is tested for all codes of
65535, and the DUT is allowed to settle for 1 ms before the meter is read. This process is repeated for all
codes to generate the measurements for INL and DNL.
digital multimeter, and a PC running the LabVIEW™ software. The EVM board is tested for all codes of
65535, and the DUT is allowed to settle for 1 ms before the meter is read. This process is repeated for all
codes to generate the measurements for INL and DNL.
shows the INL and DNL characteristic plots.
8
DAC8550/51/52 Evaluation Module
SLAU172A – December 2005 – Revised September 2006