Texas Instruments DAC8551EVM Evaluation Module DAC8551EVM DAC8551EVM 데이터 시트
제품 코드
DAC8551EVM
www.ti.com
2.2
EVM Performance
PCB Design and Performance
Figure 8. Drill Drawing
The EVM performance test is performed using a high-density DAC bench test board, an Agilent 3458A
digital multimeter, and a PC running the LabVIEW™ software. The EVM board is tested for all codes of
65535, and the DUT is allowed to settle for 1 ms before the meter is read. This process is repeated for all
codes to generate the measurements for INL and DNL.
digital multimeter, and a PC running the LabVIEW™ software. The EVM board is tested for all codes of
65535, and the DUT is allowed to settle for 1 ms before the meter is read. This process is repeated for all
codes to generate the measurements for INL and DNL.
shows the INL and DNL characteristic plots.
8
DAC8550/51/52 Evaluation Module
SLAU172A – December 2005 – Revised September 2006