Texas Instruments DAC3162 Evaluation Module DAC3162EVM DAC3162EVM Datenbogen
![Texas Instruments](https://files.manualsbrain.com/attachments/b46f99d826b2b0e0e5f558c5fb6483942eb9216b/common/fit/150/50/c15ea36eb1fb1cce99a3b94668675bfc78ce832d8d727d9a7bb51a125510/brand_logo.gif)
Produktcode
DAC3162EVM
Testing and Configuration
www.ti.com
2.5
DAC31x2EVM Configuration for DAC Output
Follow this procedure to configure the DAC31x2EVM in order to test the EVM signal output.
Step 1.
Four 0-
Ω
resistors must be moved in order to configure the output of the DAC31x2 as 1:1
transformer-coupled.
•
Remove the resistors R109, R110, R111, and R112
•
Install the resistors R211, R207, R191, and R195
Step 2.
Provide the clock input: 491.52 MHz at 1.5 V
RMS
at the J9 SMA connector of the
DAC31x2EVM.
Step 3.
Turn on power to the board at J12/J13.
Step 4.
Verify the spectrum using the Spectrum Analyzer at the two DAC outputs of the
DAC31x2EVM (J3 and J2).
DAC31x2EVM (J3 and J2).
illustrates a typical transformer-coupled output using a wave analyzer.
Figure 5. DAC3162EVM Transformer-Coupled Output at 30 MHz IF
6
DAC31x2EVM
SBOU096A – November 2010 – Revised January 2011
© 2010–2011, Texas Instruments Incorporated