Texas Instruments DLP® LightCrafter™ Evaluation Module DLPLIGHTCRAFTER DLPLIGHTCRAFTER Datenbogen

Produktcode

DLPLIGHTCRAFTER

www.ti.com

Connecting to a PC

Figure 2-9. Windows 7 Update Driver Software Select Network Driver Window

8. Click "Close" after the software updates. See

Figure 2-10

Figure 2-10. Windows 7 Update Driver Software Successfully Updated Window

2.2.3 Enabling the RNDIS Driver on Linux

DLP LightCrafter connects to Linux systems as a Linux-USB Ethernet/RNDIS device. Some systems
require USB networking support to be manually enabled. To enable USB networking follow these steps:

1. Open a command terminal.

2. Open the "/etc/network/interfaces" file in superuser mode. See

Figure 2-11

•

For example, "sudo gedit /etc/network/interfaces"

3. Add "iface usb0 inet dhcp" to the file. See

Figure 2-11

DLPU006C – January 2012 – Revised December 2013

Operating the DLP LightCrafter

Submit Documentation Feedback