Texas Instruments DLP® LightCrafter™ Evaluation Module DLPLIGHTCRAFTER DLPLIGHTCRAFTER Datenbogen
Produktcode
DLPLIGHTCRAFTER
Connecting to a PC
Figure 2-11. Ubuntu Command Terminal and "interfaces" File
4. Save the file.
5. Reboot the Linux system and run "ifconfig." See
•
If "usb0" is not present, continue to step 6.
Figure 2-12. Ubuntu Command Terminal "ifconfig" Result Before USB Setup
6. Setup usb0 with IP address. See
•
For example, "sudo ifconfig usb0 192.168.1.99 up"
•
Choose an IP address different than the address of the LightCrafter.
7. Check that usb0 was properly assigned an IP address using "ifconfig." See
.
24
Operating the DLP LightCrafter
DLPU006C – January 2012 – Revised December 2013
Copyright © 2012–2013, Texas Instruments Incorporated